Windows Azure Web Sites - Configure virtual applications

clock December 15, 2013 19:40 by author Galcho |

Support for virtual applications was added in recent updates of Azure Web Sites. This is very useful when you have a website which need to expose different applications as a subfolders. For example:

  • / - root
  • /blog - blog platform application
  • /commerce - e-commerce

This makes transition to Azure websites very easy for this type of applications:.

To enable it navigate to configure website in azure management portal. Navigate to Configure website tab:

 

And then at the bottom of the page Virtual application section can be seen:

Hit save and the app is good to go.



Guide to install Windows 8 on a VHD

clock January 6, 2012 08:12 by author Galcho |

It has been a while since Windows 8 released a Developer preview. Although I installed regular edition is time for a refresh and just came across a nice guide to install Windows 8 on a VHD.

enjoy



Vulnerability in ASP.NET Could Allow Denial of Service

clock December 30, 2011 04:42 by author Galcho |

A newly discovered vulnerability could allow DoS attack. Microsoft issued critical security bulletin MS11-100 on the case which contains update packages.

Eweek reports:

The exploit uses a specially crafted HTTP request containing thousands of form values to create a hash table that is computationally expensive to process. Any ASP.NET Website that accepts form data is likely to be vulnerable, as well as Web servers running the default configuration of Internet Information Services (IIS) when ASP.NET is enabled...

MS Security Research & Defense blog describe the issue in details as well as background on the workaround. Here is an excerpt:

This vulnerability could allow an anonymous attacker to efficiently consume all CPU resources on a web server, or even on a cluster of web servers. For ASP.NET in particular, a single specially crafted ~100kb HTTP request can consume 100% of one CPU core for between 90 – 110 seconds. An attacker could potentially repeatedly issue such requests, causing performance to degrade significantly enough to cause a denial of service condition for even multi-core servers or clusters of servers.

Since it is very easy to bring servers down with specially crafted HTTP request it is best to patch your web server immediately to avoid attacks

 

 

 



Fiddler–Compare two sessions

clock November 13, 2011 00:30 by author Galcho |

I’ve just found very useful feature in Fiddler – comparing two sessions (HTTP request and response). Even more useful – the compare tool can be configured via registry settings:

To configure Fiddler to point to it:

  • Close Fiddler.
  • Run RegEdit
  • Navigate to HKCU\Software\Microsoft\Fiddler2
  • Add a new REG_SZ named CompareTool
  • Set the new registry value to the path to your text comparison tool.


How to add Google+1 button to BlogEngine.net

clock October 9, 2011 08:36 by author Galcho |

After adding Facebook “Like” button to my blog I’ve decided to add Google+1 button as well Smile. I guess I am also going social although a little old fashioned with blog.

Again it is very easy to add it with two simple steps:

1. Add the tag to the template in order to appear in every post.

Open ~/themes/MY-BLOG_THEME and edit PostView.ascx by adding following script where appropriate:

<!-- Place this tag where you want the +1 button to render -->
<g:plusone size="small" annotation="inline" href="<%=Post.PermaLink %>"></g:plusone>

2. Add google JS at the end of the page.

Open ~/themes/MY-BLOG_THEME and edit site.master and add this at the end:

<!-- Place this render call where appropriate -->
<script type="text/javascript">
  (function() {
    var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true;
    po.src = 'https://apis.google.com/js/plusone.js';
    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s);
  })();
</script>

Please refer to google documentation for more information and to configurator to customize



Single sign on with Windows Live Id and OAuth 2.0

clock October 9, 2011 08:18 by author Galcho |

Introduction

At some point part of developing a website was creating its own AuthN system with credentials valid only for the website being built. Having lot’s of people doing this it created trouble for users remembering all the credential, emails, passwords, secret questions and so. Not to mention security implications.

Luckily at some point the biggest players started sharing the logins and OAuth was born. OAuth 1.0 was a bit complicated and this is why an effort to OAuth WRAP and OAuth 2.0 (still work in progress) is here. Having major players almost all user has accounts in one or more on the following services:

All of the above are using OAuth 2.0 which requires SSL and is the easiest version to use

Signing flow

It is described very well in OAuth 2.0 spec and in OAuth 2.0 implementation on WLID. I will put the steps here for completeness.

  1. The client initiates the flow by directing the resource owner's user agent to the Live Connect authorization endpoint, by using a URL in the following format.

    https://oauth.live.com/authorize?client_id=CLIENT_ID&
	scope=SCOPES&response_type=code&redirect_uri=REDIRECT_URL

    This URL contains the client ID, requested scope(s), local state, and a redirection URI to which the authorization web service is to send the user agent after access is granted or denied.

  2. The authorization server authenticates the resource owner via the user-agent, and establishes whether the resource owner grants or denies the client's access request.

  3. Assuming that the user has granted access, the Live Connect authorization server redirects the user agent back to the client by using the redirection URI that was provided in the initial request.

  4. The user agent calls the client with the redirection URI, which includes an authorization code and any local state that was provided by the client. For example: http://contoso.com/Callback.htm?code=[authorizationcode].

  5. The client requests an access token from the authorization server's token endpoint by using its client credentials for authentication, and includes the authorization code that was received in the previous step. The client includes the redirection URI that was used to obtain the authorization code for verification. The request URL has the following format: https://oauth.live.com/token?client_id=CLIENT_ID& redirect_uri=REDIRECT_URL& client_secret=CLIENT_SECRET& code=AUTHORIZATION_CODE& grant_type=authorization_code.

  6. The Live Connect authorization server validates the client credentials and the authorization code, and ensures that the redirection URI that was received matches the URI that was used to redirect the client in step 3.

  7. If the credentials are valid, the authorization server responds by returning an access token.

Single sign on example

Since It is based on so called 3rd party application first login is needed to accept consent form.

Preparation steps:

  1. Navigate to http://www.galcho.com/Blog/content/binary/WLID-OAuth/
  2. press Sign in button
  3. Login into the open popup
  4. Accept consent form
  5. Observe personalized message and token 
    image
  6. Close browser

Single sign on

  1. Open new browser (InPrivate preferable) and navigate to http://www.galcho.com/Blog/content/binary/WLID-OAuth/ 
  2. Verify page shows you’re not logged in:
    image
  3. Open new tab and Navigate to www.live.com and login with your Live ID
  4. Open new tab and navigate to http://www.galcho.com/Blog/content/binary/WLID-OAuth/ 
  5. Observe that you’re logged in

 image

 

Resources:



Facebook Like button and BlogEngine.net

clock October 3, 2011 08:58 by author Galcho |

I have BlogEngine.net platform for only a day now and I wanted to integrate Facebook "Like" button in it. It apeeared much more easier than I thougth. All I had to to is open the ~/themes/MY-BLOG_THEME and edit PostView.ascx by adding following script where I foun appropriate:

<iframe src="http://www.facebook.com/plugins/like.php?href=<%=Post.PermaLink %>&amp;layout=button_count&amp;show-faces=true&amp;width=50&amp;height:25px&amp;action=like&amp;colorscheme=light" scrolling="no" frameborder="0" allowTransparency="true" style="border:none; overflow:hidden; width:100px; height:25px;float:left;"></iframe>

This was all. Maybe I need to get play to web frontend more often to refresh my skills :)



Migrated to BlogEngine.net

clock October 1, 2011 20:55 by author Galcho |

Finally I was able to migrate my old blog to the new platform BlogEngine.net. Now I am ready to start blogging about Win8 development, Azure OAuth, Windows live id and facebook integration.

so many interesting subjects



Async CTP on WP7

clock February 26, 2011 00:36 by author Galcho |

I just came across an interesting article how to use C# Async CTP about digging to internals and using some custom code to make t it applicable to Windows Phone 7 projects.

Check it out: Async CTP on WP7.

In case you haven’t played with C# Async CTP  you probably should know this is next big thing in the world if multithreaded programming. Nowadays CPUs have more cores and by using I/O completion port and async programming model would make software solutions more scalable and threads will have less contention.

For more info check this PDC 10 video of Anders Hejlsberg